What is the advantage of a cold-formed stainless steel plate?
From the perspective of consumption, China’s apparent consumption has reached the world’s highest level and is close to 1/4 of global consumption. Per capita consumption of stainless steel has reached 3.4KG, which has leaped to the forefront of developing countries, but the growth rate of consumption has gradually slowed down.
From a rapid development stage with an average annual growth rate of more than 30% in consumption to a steady development stage with a current growth rate of 6.43%. Because of its corrosion resistance, high-temperature resistance, and wear resistance, stainless steel has been widely used in my country’s key development of energy, petrochemical, electric power, mining, industry, and other fields.
In recent years, stainless steel has been involved in more and more fields. Among them, the demand in the water industry, construction and structure industry, environmental protection industry, and industrial facilities will also increase year by year. In the water industry, water is polluted during its storage and transportation. It has become more and more important to people.
A large number of practices have proved that stainless steel is the best material for the water industry such as water preparation, storage, transportation, purification, regeneration, and desalination. Its advantages are: corrosion resistance, earthquake resistance, water-saving, sanitation (no rust and copper green), light weight (1/3 reduction), less maintenance, long life (40 years of use), low life cycle cost (LCC), It is a green and environmentally friendly material that can be recycled and reused. According to reports, currently, pipe stainless steel in Tokyo, Japan has reached 76%.
The water leakage rate of the pipeline dropped from the original 14.7% to the current 7.5%. After the earthquake in Osaka, Japan, the stainless steel water storage tank was intact. Recently, Japan has developed a bellows joint, which reduces the construction cost of stainless steel water pipelines by 20%, the total cost by 3%, and the maintenance cost by 3/4.
In addition, the stainless steel water pump driven by the stainless steel industry has a good market development prospect. According to the prediction of relevant persons, China’s stainless steel water pump market can reach 2 to 3 billion yuan in the past ten years. Stainless steel pumps rely on corrosion resistance, earthquake resistance, and water-saving, A series of advantages such as safety guard, lightweight, less maintenance, long life, low life cycle cost, and recyclability have won the love of the market. We have reason to believe that by adding green and environmentally friendly stainless steel materials, stainless steel pumps will surely become a pioneer in China’s pump industry and contribute to the development of China’s water pump industry.
As the advantages of stainless steel products become more and more obvious, the plates processed by the (cold forming machine) are processed by stainless steel 304 steel plates. The cold-formed stainless steel plate processed by the cold-formed forming machine is a comprehensive upgrade on the basis of the color steel tile.
The ordinary color steel tile has the advantages of low price and convenient procurement. At the same time, it also has many disadvantages such as non-corrosion resistance and a short time limit. , Most customers report that the cost of using color steel tiles is relatively cost-effective at the beginning, but generally, they have to be replaced in about 5 years. On the contrary, if you change to 304 (cold-formed stainless steel plate) to make color steel tile, it will have no rust, corrosion resistance, and long life (cold-formed stainless steel plate).
The life span is generally 30 years, while the life of color steel tile is only 5 years or so), the surface is clean and many other advantages, especially for the temporary construction of some chemical plants and processing plants, it is necessary to use stainless steel color steel tiles.
The (cold-formed stainless steel plate) we provide to customers is generally recommended to customers use 304 The material, the thickness is 0.31MM, the longest can be 12 meters when pressed out, it is very hard after pressing out because the density of stainless steel is 7.93, it is relatively hard, and it is not easy to perforate when it is thick. The equipment can be pressed to a thickness of 0.6MM, the width of the steel plate is 1500MM, and the pressed width is 840MM.