Countermeasures to prevent stainless steel zero cuts from being scratched
It is necessary to understand the content before and during stainless steel zero-cutting. This is the prerequisite to avoid stainless steel being scratched. Then, how to prevent stainless steel from being scratched during the zero-cutting process?
1. When preparing the raw materials, the stainless steel should be placed face to face or back to back. In addition, pay attention to the wear of the tools and whether there are burrs.
2. When performing zero-cut processing, first confirm whether the stainless steel is scratched, so as to check the quality of the incoming materials. If it is scratched, it should be returned and cannot be processed.
3. When performing bending, first check whether there are impurities or foreign objects on the upper and lower molds and the sheet material. If there is, the bending operation cannot be performed to prevent the crushing of the stainless steel.
4. When welding the zero cut, the welding workbench should be kept clean and flat without any foreign matter. If there is any, it should be removed in time.
5. If the product needs to be re-coated, it must be registered first, and then the operation can be performed.
6. If the parts are scratched, they should be reported in time and dealt with it in time without delay.