Monel Metal Alloy is usually sold in accordance with ISO 6208 (plate, sheet, and strip), 9723 (bar), 9724 (wire), 9725 (forging), and DIN 17751 (pipe and tube), etc.
Huaxiao is one of Monel metal alloy suppliers in China, and Huaxiao can provide free samples for your reference or you need certifications, we can send you and test them for you.
For delivery, we have a larger stock of nickel based alloys, so usually is 7-20days.
Monel Metal Alloy is usually sold in accordance with ISO 6208 (plate, sheet, and strip), 9723 (bar), 9724 (wire), 9725 (forging), and DIN 17751 (pipe and tube), etc.
Huaxiao is one of Monel metal alloy suppliers in China, and Huaxiao can provide free samples for your reference or you need certifications, we can send you and test them for you.
For delivery, we have a larger stock of nickel based alloys, so usually is 7-20days.
Monel alloy
Monel metal is an alloy of nickel based, mainly composed of nickel (52% to 67%) and copper, and contains small amounts of iron, manganese, carbon, and silicon. (If the copper content is greater than or equal to 60%, the alloy is called cupronickel.)
Monel alloy is stronger than pure nickel and has strong corrosion resistance to a variety of media, including fast-flowing seawater. They can be easily manufactured by hot and cold working, machining, and welding.
Monel Alloy Composition
| Trade Name | ASTM/AISI Monel Alloy type | UNS | %Cu | %Al | %Ti | %Fe | %Mn | %Si | %Ni |
|---|---|---|---|---|---|---|---|---|---|
| Monel alloy 400 | B 127, B 164 | N04400 | 28–34 | 2.5 max | 2.0 max | 0.5 max | 63 min | ||
| Monel Metal Alloy 401 | N04401 | 28–34 | 2.5 max | 2.0 max | 63 min | ||||
| Monel Metal Alloy 404 | N04404 | Rem | 0.05 max | 0.5 max | 0.1 max | 0.1 max | 52–57 | ||
| Monel Alloy K 500 | B 865 | N05500 | 27–33 | 2.3–3.15 | 0.35–0.85 | 2.0 max | 1.5 max | 0.5 max | 63 min |
| Monel Metal Alloy 405 | B 164 | N04405 | 28–34 | 2.5 max | 2.0 max | 0.5 max | 63 min |
sheet, strip, plate, coil, pipe, tube, round bar, flat bar, hexagon, angel bar, wire, etc.
Monel alloy is used in marine engineering, chemical and hydrocarbon plants, valves, pumps, shafts, valves, fasteners for the aviation industry, and heat exchangers.
The following provides information on the physical and mechanical properties of these products, the most complete alloy formulation, and product shape range from a single distributor.
First of all, the simplest difference is that Monel Metal Alloy K-500 (UNS N05500/ W.Nr. 2.4375) has better corrosion resistance and higher strength and hardness than Monel Metal Alloy 400.
Monel Metal Alloy K500 is made by adding aluminum and titanium to the nickel-copper matrix, and heating under controlled conditions can precipitate submicroscopic particles Ni3 (Ti, Al) in the entire matrix, thereby obtaining higher performance. The heat treatment used to achieve precipitation is commonly referred to as age hardening or aging.
Monel alloy nickel-copper alloy 400 (UNS N04400; W.Nr. 2.4360 and 2.4361) is a solid solution alloy that can only be hardened by cold work. It has high strength and toughness in a wide temperature range and can resist most corrosive environments.
So, we can understand Monel Alloy 400 price is lower than Monel Metal Alloy K500 in the same condition.
Other Name: Alloy 400, Nickel Alloy 400, UNS N04400, Monel Nickel Alloy 400
Monel Alloy K 500, Nickel Alloy K 500 (NA18, N05500)
The minimum value of the mechanical properties of Monel 400 alloy at room temperature:
| Monel Metal Alloy | TS Rm N/mm2 | YS RP0.2N/mm2 | Elongation A5 % |
|---|---|---|---|
| Monel Alloy 400 | 480 | 170 | 35 |
Monel Alloy 400 Physical properties:
| Density | Melting point |
|---|---|
| 8.83 g/cm3 | 1300-1390 ℃ |
The minimum value of the mechanical properties of Monel K500 alloy at room temperature:
| Monel Metal Alloy | TS Rm N/mm2 | YS RP0.2N/mm2 | Elongation A5 % |
|---|---|---|---|
| Monel Alloy K500 | 1100 | 790 | 20 |
Monel Alloy K 500 Physical properties:
| Density | Melting point |
|---|---|
| 8.05 g/cm3 | 1288-1343℃ |
About 60% of nickel in the world eventually becomes a component of stainless steel. It was chosen because of its strength, toughness and corrosion resistance. Duplex stainless steel usually contains about 5% nickel, about 10% austenitic nickel, and more than 20% super austenite.
Heat-resistant grades usually contain more than 35% nickel. Nickel-based alloys usually contain 50% or more nickel.
Passenger aircraft on maintenance of engine and fuselage repair in the airport hangar
For guidance on choosing the right Monel Nickel Based Alloys for your application, please contact us.
